View 4565142-C08P5S_3909578.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

developed and produced by packard-hughes interconnect (phi), the mil-c-28876 fiber optic connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh environments. this connector is used extensively by the united states navy in shipboard applica- tion and has been on the united states government's qualified products list since 1983. available in 2, 4, 6, 8, and 31 channel configurations single and multi-mode capability full environmental sealing utilizes field-proven mil-t-29504 termini field maintainable fiber optic connectors mil-c-28876 fiber optic connectors qpl military and commercial equivalent available page 1 connector performance durability 500 cycles per eia-455-21 vibration per mil-std-1344, method 2005, condition ii & vi mechanical shock per mil-s-901, grade a medium weight thermal cycling -62? to +70? per mil-std-1344, method 1003 corrosion resistance 500 hour salt spray per mil-std-1344, method 1001 ozone exposure 150 ppm/2 hours per mil-std-1344, method 1007 humidity 240 hours per mil-std-1344, method 1002 fluid immersion per mil-std-1344, method 1016 crush resistance 225 pounds per mil-std-1344, method 2008.1 maintenance aging per mil-std-1344, method 2002 terminus retention force 22 pounds minimum per mil-std-1344, method 2007 insert retention axial 100 psi minimum per mil-std-1344, method 2010 cable pull out force 162 pounds minimum per mil-std-1344, method 2009 cable seal flexing 100 cycles per mil-std-1344, method 2017 impact per mil-std-1344, method 2015 flammability per mil-std-1344, method 1012 operating temperature range -54? to +65? storage temperature range -62? to +71?
mil-c-28876 fiber optic connectors standard materials and plating page 2 description materials finishes insert aluminum alloy anodize boot, strain relief fluorosilicone none connector and backshell housings aluminum alloy cadmium plate (olive drab) over electroless nickel connector: mil-spec ordering nomenclature m28876/ 7 b 1 2 p 1 * optical performance data consult factory for non-standard and custom specifications. the average insertion loss is .5db for ceramic termini. these figures are derived from actual field measurements taken from thousands of mated pairs of termini across our line of multi- channel connectors. the source launch wavelengths were 850 and 1300 nanometers. see table i see table ii see table iii see table iv terminus cavity designator p = pin s = socket keying position designator 1 thru 6 when ordering a /1, /6, or /11 connector type and do not require insert retention nut and pressure sleeve (to expose accessory thread for alternate backshell addition), add n to the end of part number nomenclature (e.g.: m28876/6b1p1n) table i connector type strain relief slash sheet designator wall mount receptacle none 1 wall mount receptacle straight 2 wall mount receptacle 45 3 wall mount receptacle 90 4 in-line receptacle straight 5 plug none 6 plug straight 7 plug 45 8 plug 90 9 jam nut receptacle none 11 jam nut receptacle straight 12 jam nut receptacle 45 13 jam nut receptacle 90 14 table ii shell size shell size designator 11 a 13 b 15 c 23 f table iii # of cavities shell size insert designator 211 1 413 1 615 2 815 1 31 23 1 table iv backshell maximum cable diameter listed inches (mm) number shell size designator 11 13 15 23 1 .250 (6.35) .285 (7.24) .515 (13.08) .866 (22.00) 2 .346 (8.79) .256 (6.50) 1.000 (25.40) 3 .375 (9.53) .600 (15.3) (omit if no strain relief.)
mil-c-28876 fiber optic connectors page 3 connector: commercial equivalent ordering nomenclature 1145846? b 04 2 p 1 s see table i see table ii see table iii see table iv p = pin s = socket 1 thru 6 assembly configuration table i: assembly configuration phi number connector type strain relief 4565141 wall mount receptacle none 1145840 wall mount receptacle straight 1147630 wall mount receptacle 45 1147640 wall mount receptacle 90 1145841 in-line receptacle straight 4565143 plug none 1145846 plug straight 1147636 plug 45 1147646 plug 90 4565142 jam nut receptacle none 1145844 jam nut receptacle straight 1147634 jam nut receptacle 45 1147644 jam nut receptacle 90 4567626* wall mount receptacle none 4567627* jam nut receptacle none 6567628* plug none *part numbers end with ??in place of ?? ?o strain relief, no insert retention nut and pressure sleeve, to expose accessories thread for backshell addition. table ii: shell size designator shell size number of designator shell size terminus cavities a 11 2 b 13 4 c 15 6 or 8 f 23 31 or 18 table iii: number of terminus cavities m28876 insert arrangement # of cavities shell size equivalent 02 11 1 04 13 1 06 15 2 08 15 1 31 23 1 18 23 2 table iv: backshell number designator backshell maximum cable diameter listed inches (mm) number shell size designator 11 13 15 23 1 .250 (6.35) .285 (7.24) .515 (13.08) .866 (22.00) 2 .346 (8.79) .256 (6.50) 1.000 (25.40) 3 .375 (9.53) .600 (15.3) (omit if no strain relief.) shell size designator number of terminus cavities backshell number designator terminus style keying position all numbers end with ? *except as shown below mil-spec equivalent to packard-hughes interconnect mil-spec phi number number m28876/1 4565141s m28876/2 1145840s m28876/3 1147630s m28876/4 1147640s m28876/5 1145841s m28876/6 4564143s m28876/7 1145846s m28876/8 1147636s m28876/9 1147646s m28876/11 4565142s m28876/12 1145844s m28876/13 1147634s m28876/14 1147644s
mil-c-28876 fiber optic connectors page 4 plug connector connector a b c d e f g size max max max max max max max 11 1.028 .960 5.960 6.090 3.540 4.190 4.250 13 1.141 1.085 5.960 6.160 3.580 4.190 4.250 15 1.263 1.255 5.960 6.440 3.850 4.440 4.500 23 1.703 1.760 5.960 7.350 5.000 4.550 5.000 dimension table, plug connector a max b max b max
mil-c-28876 fiber optic connectors page 5 plug connector
mil-c-28876 fiber optic connectors page 6 wall mount receptacle connector a b c d e f g h j k size max max max max max max max 11 .750 .960 .750 .130 1.043 6.150 6.150 3.540 4.250 4.250 .115 1.00 13 .875 1.085 .843 .130 1.158 6.150 6.250 3.580 4.250 4.250 .115 1.116 15 1.062 1.255 .968 .130 1.278 6.150 6.500 3.850 4.500 4.500 .115 1.236 23 1.500 1.703 1.281 .130 1.738 6.150 7.500 5.000 5.000 5.000 .115 1.698 dimension table, wall mount receptacle b max a max
mil-c-28876 fiber optic connectors page 7 wall mount receptacle dimension table, panel cutout, wall mount receptacle recommended panel cutout (wall mtg.) shell size x ?005 y ?005 11 .812 .750 13 .937 .843 15 1.125 .968 23 1.562 1.281
mil-c-28876 fiber optic connectors page 8 jam nut receptacle connector a b c d e f g h j k size max max hex thread max max max max max 11 .750 .960 1.368 1.079 .875-20 6.150 6.150 3.540 4.250 4.250 1.345 1.045 unef 13 .875 1.085 1.508 1.205 1.000-20 6.150 6.220 3.580 4.250 4.250 1.485 1.171 unef 15 1.062 1.255 1.608 1.392 1.875-18 6.150 6.500 3.850 4.500 4.500 1.585 1.358 unef 23 1.500 1.750 2.118 1.829 1.625-18 6.150 7.500 5.000 5.000 5.000 2.095 1.795 unef dimension table, jam nut mounting receptacle
mil-c-28876 fiber optic connectors page 9 jam nut receptacle dimension table, panel cutout, jam nut receptacle recommended panel cutout (wall mtg.) shell size x ?005 y ?005 11 .885 .848 13 1.010 .973 15 1.198 1.160 23 1.635 1.598 mil-c-28876/13 1147634 mil-c-28876/14 1147644
mil-c-28876 fiber optic connectors page 10 dust covers: mil-spec ordering nomenclature m28876/ 10 c c w see table i see table ii see table iii see table iv assembly configuration (slash sheet) table i: assembly configuration slash sheet connector type /10 plug /15 receptacle table ii: shell size designator shell size designator shell size a 11 b 13 c 15 d 23 shell size designator attachment designator material and finish designator table iii: attachment designator attachment designator type of attachment c wire rope w/fastener d wire rope w/ring e without rope table iv: material and finish designator material and finish type of material designator and finish w aluminum with olive drab cadmium plating d stainless steel with black cadmium plating
mil-c-28876 fiber optic connectors page 11 dust covers: commercial equivalent ordering nomenclature 4565071? c c w s see table i see table ii see table iii see table iv assembly configuration (slash sheet) table i: assembly configuration phi number fits connector type 4565071 plug 4565070 receptacle table ii: shell size designator shell size designator shell size a 11 b 13 c 15 d 23 shell size designator attachment designator material and finish designator table iii: attachment designator attachment designator type of attachment c wire rope w/fastener d wire rope w/ring e without rope or chain table iv: material and finish designator material and finish type of material designator and finish w aluminum with olive drab cadmium plating d stainless steel with black cadmium plating all numbers end with ? mil spec equivalent to phi mil-spec number phi number m28876/10 4565071s m28876/15 4565070s
mil-c-28876 fiber optic connectors insert arrangements page 12
mil-c-28876 fiber optic connectors page 13 0 1 95 141 208 236 11 2 113 156 182 292 and 3 90 145 195 252 13 4 53 156 220 255 5 119 146 176 298 6 51 141 184 242 0 1 80 142 196 293 2 135 170 200 310 15 3 49 169 200 244 4 66 140 200 257 5 62 146 180 280 6 79 153 197 272 1 80 142 196 293 2 135 170 200 310 23 3 49 169 200 244 4 66 140 200 257 5 62 145 180 280 6 79 153 197 272 0 keyway available only on commercial. shell size ar or ap key and keyway arrangement mil-c-28876 keyway arrangement br or bp cr or cp dr or dp ?000 delphi automotive systems. all rights reserved. dp-00-e-xxx packard-hughes interconnect 17150 von karman avenue irvine, ca 92614 usa tel: [1] 949.660.5701 fax: [1] 949.660.5825 www.packardhughes.com delphi packard electric systems p.o. box 431 warren, oh 44486 usa tel: [1] 330.759.6000 fax: [1] 330.759.6085 www.delphiauto.com packard-hughes interconnect packard-hughes interconnect is a subsidiary of delphi automotive systems. gold dot is a trademark of packard-hughes interconnect.

▲Up To Search▲

Price & Availability of 4565142-C08P5S

	To Download 4565142-C08P5S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .